That's not the person I originally asked.

The person I asked actually did reply to me on this thread... but didn't answer how they know all this.

How do you know all of this?

I just want a reasonably priced generational bump over the Index. Most PCVR headsets that have pancake lenses are either obscenely priced, are ridiculously heavy, or have reportedly terrible QA. From what I've seen lately, usually all three are true.

You can get close in features and price with something like a Pico or a Quest, but they lack direct DisplayPort connection, so it's compressed wireless PCVR, compressed "wired" PCVR (which basically uses a networking protocol anyway), or no PCVR at all.

Myself, and I'm sure a ton of other people, are hoping for the Deckard to be "huge" for the PCVR market, just like the Index was when it released. Maybe we're all coping, and we probably even are, but I think a lot of people are generally unhappy with the state of the PCVR hardware market right now.

So all this is to say... I really hope this thing is much better than a glorified flat screen projector.

If you don't want to open this and solder a chip, then no, you can't do what you want.

The closest you can get is to enable AutoRCM, which will cause the Switch to always boot into recovery mode and accept a payload. This skips the need to use a jig in the Joy-Con rail, but you still need to inject a payload. And because recovery mode is just a black screen, you don't have any visual feedback to know if the Switch is actually in recovery mode, or if the battery is just dead.

Your best option is to just boot into whatever OS you use most, then make it a habit to keep it charged enough to not shut down.

However, I do believe they’re entering a very oversaturated market, with the likes of 8BITDO and GuliKit creating high-quality, affordable controllers in the same niche. ANBERNIC would have to aggressively outprice them to get any kind of attention, but only time will tell.

Not really. 8BitDo really blew it with the Ultimate. They confusingly have two different "versions" of it, and neither have the full range of device compatibility that previous 8BitDo controllers had. The most egregious exclusion from the Ultimate was Xinput over Bluetooth. I still have no idea why they decided to drop that.

Its design takes inspiration from a modern-day Xbox controller and is fully compatible with PC, Steam, Nintendo Switch, Android, and iOS using Bluetooth 5.3 and 2.4g connection. It can also be connected using a USB-C wire too.

If this new controller has Xinput over Bluetooth, all of the compatibility from above, and a strong battery life, it might be a day 1 buy. It will have hall effect sticks, so this sounds like everything I wanted the 8BD Ultimate to be. I hope there aren't any showstoppers once reviews start coming out.

They've been on some kind of emulation crusade then, because it looks like they just killed Ryujinx:

I'm really curious to learn how you get calls in so many different languages. I could definitely see Spanish, English, and maybe Vietnamese all being spoken in a general geographic area, but you listed a lot of diverse languages. Pretty cool if that's really all within one area!

They just sent out a mass email to users yesterday informing us of this, I got it too. I wonder if it wasn't getting enough attention, or if they wrote this back in June but only just made the article visible.

Fun fact: they spent quite a while working on a segmented 3D animation system for all the sprites. Every sprite is split up into segments, and then those segments are positioned in 3D space depending on the camera angle. They can even independently move each part of a character, like a leg, without having to create an entirely new sprite just for one frame.

This is 3 years old at this point, but this should give a good idea of how the new animation system works!

https://youtu.be/ybvaehpoYOs?t=52m26s

I use Backblaze B2, but stored in an encrypted Restic container, set up using this guide:

https://helgeklein.com/blog/restic-encrypted-offsite-backup-with-ransomware-protection-for-your-homeserver/

Restic has been great for automating backups, and even letting me mount the encrypted storage to grab individual files. I like doing it this way since I don't have to trust Backblaze isn't reading my data - I know for sure that they can't.

Performance of storage that is both remote and encrypted is about what you would expect, but I don't need access to the data unless something bad happens.

Had to quadruple take this wasn't a Battle Network community, what a crazy thing to see on Lemmy.

We should bring back r/OkBuddyNetwork on Lemmy.

Ok.... sure. But what physical devices would I use, and what software would they run?

Are there any "open" solutions to mesh networking that can compare to TP-Link Omada? I don't think any open source hardware or software can come close, especially not for the newer Wi-Fi standards.

I haven't bought them yet, but I'm seriously thinking about some Omadas. I imagine I can prevent them from phoning home, and the management software can run locally in a Docker container. Running it like that would be good enough for me even though they're not "open."

I'm planning a rework of my home Wi-Fi, and my current plan is an OPNsense box from Protectli, and a few EAP772's:

https://www.tp-link.com/us/business-networking/omada-wifi-ceiling-mount/eap772/

If there's something comparable/better that's more of an open ecosystem, you definitely have my attention while I'm shopping around for different options.

Definitely recommend Motrix:

https://motrix.app/

If the Google download link supports it, it should be fairly resistant to interruptions. If it doesn't, this might not help much, but you should still use this instead of just a browser.

I haven't tried to download a Google takeout, so you might need to get clever with how you add the download link to it.

If you just can't get it to work, you can try getting the browser extension to automatically send all downloads to Motrix. There is some setup required, though:

https://github.com/gautamkrishnar/motrix-webextension

Good luck!

Damn, I guess you're right. It's a shame I don't have the money to move.

I'll have to abandon my elderly family, put my pets up for adoption, and stow away on a local fishing boat for a few months. I guess it's the only way.

...but seriously, this is my point. Yes, this is all bad, but what do you want me to do? Being able to just jump ship is a privilege I do not have. If the building is burning, then I'm not getting out in time.

You guys make this sound like some kind of doomsday movie.

I'm not downplaying how bad things are, but if you really have the several thousand dollars you'd need to actually uproot your entire life just sitting around, good for you. Most people don't have that kind of free money.

And good luck moving if you have pets, or have family members you care for. Have you guys even been to your "target" countries? Do you have plans for how you'll make income? How does healthcare work in your target country?

If you have all that figured out, and have nothing to leave behind, then good for you, I really do hope you end up better off. But this panicked response of "What are you waiting for, run!!!!!" is way more entitled than people seem to think.

Everyone sees this notice, I saw it on the official desktop Firefox client. They're just trying to reach as many people as possible.

They have to restrict themselves to pickpocketing roaming NPC fascists.

What? Fascists? RuneScape doesn't have...

Oh. HAM, I almost forgot about those guys.

OF requires strict government issued ID verification in some jurisdictions. Patreon does not, at least in the US.

That should be your deciding factor already. No one should have their privacy invaded just to send you a few bucks a month.

What do you mean? RPCS3 is an excellent emulator. It's not completely hardware accurate, almost no 3D emulator is, but it's still pretty good.

Be aware, it's not free as in costs $0, it's free as a "Giveaway," where you must accept these terms:

By clicking the ‘Add to library’ button, I agree to receive marketing communications from GOG and CD PROJEKT on my email address and through GOG services and GOG’s Trusted Partners’ services, to get Shadows: Awakening. See our Privacy policy.