Not sure what the price is in Euros, but it's also %41 off on Fanatical.
You have to have the person in your Steam friends at the time of purchase, but you can schedule the delivery for a specific date and time.
If you buy it on Fanatical, it's only 78% off, but you get a Steam code which you can give to anyone at any time.
They serve a legitimate purpose, but can be abused like many other things. Making them illegal just makes addiction a crime.
Can't speak for Ontario, but I know a few people who've worked in convenience stores and gas stations here, and occasionally they have someone come in and test the clerks. A teenager trying to buy cigarettes or alcohol, for example, or someone trying to buy alcohol after 11pm. Most convenience stores close at 11pm, and those that don't will usually lock the wine racks and beer fridges.
Times are limited in Canada. For example, in Quebec you can't buy alcohol between 11pm and 6am except in bars, and bars have to close at 3am.
Linux based windows emulator
Wine is not an emulator. It's in the name.
I'm really just joking, but it's a translation layer which has much less overhead compared to an actual emulator. That's why you can get performance that is so close to Windows, and sometimes even better since the OS itself takes up fewer resources as well.
Only if the people doing the exploiting aren't using Windows, because that goes against the terms of service.
I don't know get why they would make it with UE5 when they have their own in-house engine.
For PLA, ethyl acetate is a solvent that will do the job.
There's a glue for PLA called 3D Gloop which is basically a solvent mixed with PLA that also essentially welds PLA together. I haven't used it, so I don't know what color it is and if it will show over transparent prints.
Long press the desktop and go into wallpaper & style, you have options there to change the colors.
By default the icons are black and white, but if you long-press the desktop, there's a wallpaper & style menu that lets you change the colors to one of several options, including matching your wallpaper or a bunch of pastel color pairs.
They tried something that they already knew people hated. Launchers have been the bane of gamers for decades already.
"Making things better" after first making them worse.
He's practically hit the 1000 lbs club powerlifting with a single lift.
Not only that, it wasn't even on his property.
How to stop audio device from changing?
Currently running Nobara, and having audio annoyances.
Any time any app loads anything new, it will switch my audio device back to default. For example, if I open a playlist in VLC and choose my speakers as the output device, when it's done playing one file, it will open the next one and start playing audio through the headphones.
If I'm watching a video on Youtube and choose speakers, as soon as I leave the page it goes back to headphones.
Is there a way to prevent the device in use from switching back? If I switch device, I just want it to stay on that device until I choose to switch back. I literally never want it to switch on its own. ATM, the only way is to manually go it and change the default every time instead of just clicking the checkbox in the volume popup.
Many games think my native resolution is wrong
This is a recent issue, and I don't know what has changed to cause it. There seems to be no rhyme or reason as to which games work and which ones don't. My monitor's resolution is set to 2560 x 1440 in the display settings, but some games don't recognize it.
Of the games I have installed, Subnautica, Dark Souls III, Sekiro, Control, Hades, and Hi-Fi Rush think my native resolution is 1896 x 1067 and they won't let me change it to anything higher than that.
Elden Ring, Ark Survival Ascended, and Returnal detect my resolution correctly and work fine.
This is all from Steam without any custom launch settings, and with and without gamescope. I've tried custom resolution command line options for Subnautica and that hasn't helped either.
I'm running an RX 6700 XT on Nobara with everything currently up to date. I'm not sure when this issue started, but it's recent, probably within the last week or so. I've definitely run Control and Sekiro at the correct resolution before, but in my recent testing they no longer work right.
Does anyone know what could be causing this? Why some games work fine and others don't?
Cooler Master NR200 White ITX case $50 (Amazon.ca)
I haven't bought from Amazon in several years, but I made an exception for this deal. I've never seen this go below $80 before.
Anything special to deal with if upgrading CPU generation?
Are there any software issues I may/should deal with when doing a full system upgrade? I'm going from AM4 to AM5, so new CPU, motherboard and RAM.
It should be pretty straightforward under Linux, right? Just swap my drives over and boot up? I've only ever done single upgrades at a time, never a full generation.
Anyone have experience with the Jonsbo N1? Thinking of modding one
So it's a SFF case meant for NAS use. It has 5 slide-in 3.5" drive bays and can only handle a low-profile PCIE card.
I'm thinking of picking one up and mangling it to force in a 2-slot GPU. I want to basically remove the drive bays and the PCB with the SATA slots, ditch the PSU frame, move the motherboard frame back or flip it around, and 3d print a new backplate for the case.
I'd stick the PSU where the drive bay used to be and run an extension to the back of the case, and then there should be room for a full-sized GPU mounted vertically in the case.
Do you think this would be achievable? Am I crazy for even thinking about it?
Now if only I could also fit an AIO in there.
EDIT: Link to the case - https://www.jonsbo.com/en/products/N1.html
Is anyone playing Ark Survival Ascended?
I've had the game running fine for months, but experience constant crashes if I have foliage and fluid interaction enabled. Has anyone been able to run the game with this on?
Currently on Pop!OS running a 6700XT, and having the issue under both X and Wayland.
Updates stalling in desktop mode
Is anybody else dealing with this? In game mode updates install normally, but if I go into desktop mode, updates stall and never finish downloading. And unfortunately you don't get to install desktop updates from game mode.
My internet connection works fine on firefox, and is plenty fast, so it's not a connectivity issue. I'm not sure what's going on.
What are some good co-op games that are playable on PC and Mac?
A friend of mine was a gamer many years ago but hasn't been gaming in a while. They run a Mac and I run a PC. What are some good patient games we can play together?
Klipper keeps deleting my Z offset instead of saving it
Every time I use calibrate_probe, I get the message "The SAVE_CONFIG command will update the printer config file with the above and restart the printer."
When I click Save Config, it restarts the firmware, and then I get the warning "Option 'z_offset' in section 'bltouch' must be specified."
If I go check my printer.cfg, the [bltouch] section now has z_offset commented out with the old value and I have to remove the comment and copy in the new value.
Am I missing something? What am I doing wrong?
Need help with setting z-offset on Klipper for my S1 Pro
I'm getting increasingly frustrated trying to get my printer calibrated. I've done a bed calibration using screws_tilt_calculate, and that's all nice and good. Got a bed mesh variance of 0.19mm which seems great.
Now for the z-offset, it won't let me get the nozzle low enough. No matter how low I set the Z minimum, it won't let me get closer than about 0.5mm to the bed. I've tried setting the position_min in [stepper_z] anywhere from 0 to -9 and I get the same result every time.
If I raise the bed, the probe adjust its height accordingly, so the result is the same.
What can I do to fix this?
Has anyone been playing Ark Survival Ascended on Linux? (solved my problems, I think)
I picked it up and have been playing it. The first day, it seemed to run fine, but today I've been having a ton of trouble with it. I'm struggling to go 15 minutes without crashing, and when it does crash, Steam stops responding entirely until I reboot.
Edit: I can't explain why, but after checking my logs, whenever my computer full-crashes, it's apparently caused by bluetooth, despite not having any connected bluetooth devices. I've disabled the bluetooth service, and now the game only crashes to desktop. Small wins, I guess.
Another edit: I appear to have fixed my problem. I installed gamemode via apt, and added 'gamemoderun %command%' to the launch options in Steam. Haven't crashed since.
What's the easiest way to model a print in place screw?
I want to print a simple mechanism to adjust the distance between two pieces with a screw that can't come out of its socket on either end. What's the easiest way to model this?
Installing a glass bed on an Ender 3 S1 Pro
I just got a glass build plate for my S1 Pro, and I'm not sure of the best way to use it. The bed has two screws at the back that stick up a bit past the magnetic sheet and the PEI build plate has two notches to accommodate them, which helps line up the plate. The glass build plate doesn't have any notches, so it can't go flush all the way to the back.
The glass plate is sized the same as the bed, but it can't fit on the bed without hanging off the front of it. Is this normal?
Edit: So the screws on the bed are literally just for the alignment of the magnetic PEI plate. They can be taken out without issue. I tried looking up videos before I posted, and none of them have the same bed as mine, they all seem to have a full-surface magnetic sheet and a full-surface PEI plate.
What to do with all these peppers?
I've recently harvested about 5 lbs of habaneros from two plants I was growing. What the hell do I do with so many peppers? I'm pretty sure I'm going to have to give at least half of them away.
Finishing TPU
I know that paint doesn't work well with TPU and that the typical way to color a piece is with dye. Does anyone have experience decorating prints that will see heavy use? Like if I wanted to use multiple colors, can dyes be brushed on similar to how one might hand paint a model? Is there a better way to do what I want?
Is there a reason to use a dedicated switch with a home router?
My work gave me a L2 switch because they were going to toss it out. Is there any reason for me to use that over the built-in switch from my ISP's router/modem?
What's a good solution for a small NAS?
I'm looking to offload all my media from my main PC and make it accessible to other devices in my house. It's likely to only be a few TB, probably 2 drives at most.
I've been trying to find a low-power solution since it will be running all the time. I do have a PoE switch, so it would be a bonus if it can run off PoE but not a requirement. I've been checking out a lot of the SBC's that have become popular over the past couple years, but even the budget ones have gotten pretty expensive.
What are some good options?
Apps uninstalling themselves?
I'm running Ubuntu, and every once in a while, I boot up my PC and some app is missing that was there previously. Last night I shut down my computer, and this morning Firefox was missing. I lost all my browsing history, cookies, bookmarks, extensions, etc.
This has happened several times before. Does anyone know what's going on? I know I'm not personally removing any of these apps. Is there something I could be doing unknowingly to do this?