The factory gets paid in step #1 (many can accept direct wire transfers or have Hong Kong/Singapore/ or even New York banks). Sometimes a deposit is made to start an order and the final amount is paid to release it from the factory after inspection.
There are agents who can handle funds on your behalf and when you work with a new factory or it is a super large order, it is common to use a service that will escrow the funds until the goods have been inspected and released.
Sometimes we even have our own staff monitor the assembly and packaging inside the factory to be sure the quality of parts we ordered are actually going into each piece. This is normal every day in Chinese factories, they know the game.
Here's how tariffs work (I import stuff from china)
- I find a Chinese manufacturer of widgets and negotiate with them. One of their first questions is, what incoterms do I require? I tell them EXW which makes their quotation the easiest to provide.
EXW means that once the goods are ready, I'll send my shipping agent to go get them and bring them to me in my country.
-
I call my agent and tell them to get the goods. They ask a lot of questions about the contents of the goods and figure out which HS code to use, which is a classification of what the goods are (such as bicycle tires, or unfinished lumber, or whatever).
-
The agent prepares an assload of documentation for my shipment. They send a truck to the Chinese warehouse, get the stuff, load it into a container, take it to a shipyard. It's loaded, boat moves to the US, boat is then unloaded, and my container is put into an inspection queue.
-
The shipping agent forwards the documents about my container, which has not been released, to US customs. US customers decides if they want to manually inspect it or not, and then issues an invoice for the taxes. My agent calls me and says Mr. Nucleative, your customs bill is $9,845.50.
I pay them, they pay the US customs office. Customs releases my container.
-
The truck is cleared to pick up my container and drive it to my warehouse.
-
Now I unload and sell the goods to my customers.
Did you notice in step #4 that I paid the import tariffs? Now my cost to get the goods to my customers went way up. My margins are pretty thin, so I can't do this business unless I charge my customers more or else I'm running a charity. Now, my customers have to pay me more. That money goes straight to the US government.
Hypothetically now it's less unattractive to set up a factory in the USA, encouraging more local jobs. But damn, did you know we also need to import rubber, and metal, and machine parts, and cardboard for packaging, and all the other raw supplies either way? The local factories, if there are any, can probably not increase production to meet demand anyways, at least not in a month or two. Does anybody remember what happend when demand outstrips supply?
There is no rocket science here, just people learning from the wrong people.
Not all imported goods are made with unfair labor practices.
Get a supported version of Linux on there, give it a static IP on your LAN, install Pihole by following the guide at
Update the DNS ip that your router gives out to the IP of your netbook, and voilà, most ads can't load any more.
Even mobile phone apps that have ads won't show the ads when you're connected through your home network.
For those who don't recall Google was forced to block Huawei from using their tech by the US government. It put Huawei in a difficult position especially because they are/were one of the largest Android phone markers by total devices sold.
https://www.wired.com/story/huawei-google-ban-uk-android/
So of course Huawei wants to disconnect itself as much as it can from western technology to prevent such a thing from ever happening again.
Pihole
Well, I'm sure the US military complex is excited to test whether they can swat these out of the sky with their expensive toys. Now they have a chance to try.
And the more Russia launches, surely that technology will improve
I too have a nearly perfect replica of this piece. I'm selling each piece, which is part of an extremely limited run of 1000 pieces in total produced this week on demand, signed and sealed in a Tupperware container for freshness, for $2,990 each, worldwide shipping is just another $299.
The buyer of chrome could make bing the default search engine and re-enable whatever broke Ublock origin (the ad blocker)
They could also cripple gapps and gmail a bit. It would also be harder for google to unilaterally develop new web standards.
That would no doubt consternate a few at Google and knee cap them forcing web shit down our throats that only improves their ad business.
Me too but here's one useful function:
Perhaps you are aware there is an ongoing event, say for example a football game, or an election, or an outage of your email service provider. You go to one of these "scream into the void" social sites, search on the topic, and learn what people are saying about it. Maybe someone knows what's really going on, maybe some of those people have some interesting insights and you engage with them, not unlike you and I are engaging right now. Others can observe, perhaps contribute, and after the event has concluded, everyone goes their own way. Hopefully in the end the interactions are beneficial for all.
Those kind of things have to be done in every single district and costs millions of dollars. Unless there's a probable chance, it's probably better to save the cash and use it for something that could get results in the future
When seconds matter... The cops are minutes away
I think it can also be informative when staff is choosing the competition.
If the business understands why those products are successful at solving whatever problem the staff is trying to solve, it may help management see either how they've misdefined the problem or screwed up the solution.
Both are probably good - eat your own dogfood and the competitor's too, haha.
There was only one, we're all still copying from him or her.
Pretty embarrassing if you're Musk
You're not wrong about the first part and the constitution, by way of how the votes came in, says Trump is the next President.
If that makes Biden derelict of his duty, however, that would be a leap because I don't think Trump has been convicted or otherwise held to account of anything that would be disqualifying.
If the sitting president can eliminate the incoming president because he believes him to be a threat then damn, were right back to where we started.
I too cannot read "MTG" as anything other than Magic: The Gathering
Where's this yhwh library, can I install it with pip? Seems like it could have potential for some of my projects.
I think there are two answers to this. First, there is a long standing tradition in the US that the new guy doesn't put the old guy in jail.
Look at so many other countries and so much of world history to see how that style of governing is problematic to the transfer of power from one regime to the next and why it causes its own set of problems.
The second, and arguably the most important, is that the American people as a whole can elect whoever the fuck they want to be president, no matter what any mid level beurocrat, judge, lawmaker or even current president or other official says about the issue, even if said person is in jail at the time.
The law and its punishments should still apply to all, including the president and former presidents, however.
Russian President Vladimir Putin has presented a car to his North Korean counterpart Kim Jong Un, North Korean state media said Tuesday, in another sign of warming ties between the two countries that have raised concerns in the United States.
Have you ever seen this type of print failure?
Pretty sure I'm having heat creep up the Bowden tube, as it's getting jammed a few cm back from the hot end and then can't push the filament any more. When I get it out there's a little molten bulb at the filament.
In this fail, I think it jammed as usual and the extruder found a way to keep going.
I tried turning down the hot end from 215 to 200 and it's still failing. My cooling fan is running at 100%.
This is the third time I've had this print fail at about this layer, around 1 hour into what will be a 26 hour print.
Any ideas?
Mind blowing experience with ChatGPT - Upload my audio narrative and then ask me questions
I'm in the process of hiring for a position and I have two candidates. It's a tough call because both are very proficient but each has some unique attributes. I thought I might ask ChatGPT's assistance with thinking it through.
I recorded myself talking through my thoughts on each one as I read through their resume and the Q&As that I've done with each. Then uploaded the audio file to the whisper-1 api for transcription (for this I'm using the OpenAI API).
Then I pasted the transcribed text into GPT4 and then prompted it with: "Above is my transcribed notes comparing two candidates for a position together. Help me think through this decision by asking me questions, one at a time."
ChatGPT proceeded to ask me really good questions, one after the other. After a while I felt like it had got me to think about many new factors and ideas. After about 22 questions I'd had enough, so I asked it to wrap up and summarize our next steps, to which it spit out a bullet-point list of what we'd concluded and, what steps we should take next.
I don't know if everyone is using ChatGPT this way, but this is a really useful feedback system.
Washington state senator arrested in Hong Kong for carrying a gun through airport
An American politician has been arrested in Hong Kong for carrying a gun into the city, according to a charge sheet seen by CNN, in what he has called an “honest mistake.”
City bike that I tested today
This bike has a 10ah battery in the seat post and a 7 gear derailleur. Top speed is limited to 25km but I think it can be reprogrammed to remove the limit.
How to solve power supply whine with continuous dimming LED?
Discover the magic of the internet at Imgur, a community powered entertainment destination. Lift your spirits with funny jokes, trending memes, entertaining gifs, inspiring stories, viral videos, and so much more from users like presandceo.
My project is a "breathing" white 12v LED strip controlled by an esp32 on a dev board, and switched with an IFLZ44N mosfet.
In my video you can see it working but also hear the power supply complaining.
I'm using the LEDC Arduino library which allows me to select the frequency and resolution for PWM.
If I set the frequency too low the whine is extreme, but at this setting it's the best I've been able to achieve, which is about 9000Hz. Unfortunately you can still hear the sound from across the room!
It is a cheapo solid state power supply that claims it can output 12v up to 25A. I tried my desktop supply and it emits some whine too, so I don't think replacing the power will totally fix this.
Is there a technique for tuning the frequency or even just masking it somehow?
Retail Space - how to choose?
I own a business that sells directly to customers we find through local Facebook and Google advertising.
Our profit model is just ok - the business pays its own bills but I don't feel that it's been worth my energy yet.
About 2 years ago I opened a retail shop in the city, decorated it nicely, but in a poorly located building that doesn't have much walk-in traffic and very little parking.
I'm considering relocating to an area that would be much better located for parking and walk-by traffic. Of course the price is higher, about twice as much.
I'm looking for advice about how to decide if this is a wise move. I don't understand which metrics are important for retail as I try to spreadsheet this idea, and my background is in e-commerce and services businesses.
I'd like to be able to make some educated assumptions about whether our sales will increase and by how much.
Why do you or why don't you use an ebike for your commute?
I live in a city where public transportation is overcrowded, there's constant vehicle traffic, and you can't depend on any commute time for a given day or hour. The average temperature is very high, so walking is a sweaty affair.
The only way I've found to make this city more usable is with an ebike and scooter. It's like the perfect vehicle for these conditions.
However, many people reject the technology and either choose their car or other forms of getting around.
Is it because it's not well understood, or seems too expensive?
I'm curious what sold you on the technology or what is the reason you're not making the leap.
Discover the magic of the internet at Imgur, a community powered entertainment destination. Lift your spirits with funny jokes, trending memes, entertaining gifs, inspiring stories, viral videos, and so much more from users like presandceo.
Saw this come through from Octoprint remotely. It was an 8 hour print and died about at about the 7:15 mark.
Are you doing anything to protect yourself or your home from the risk of a fire?
68mph E-Scooter - why?
The fastest electric scooter in the Zondoo lineup is the RoadHitter, which claims 68 mph with 70-80 miles of range.
This scooter features dual 4000 watt motors and can achieve 60+ mph speeds straight and level. But why?
This speed is surely deadly in the event of a crash and it's hard to image it would even be fun to ride at such a speed.
Report: Urban residents plan to use micromobility ‘substantially more in the future’
Has micromobility already changed your commuting habits? What about your selection of place to live?
I live in a huge city with gridlocked traffic, and an e-scooter enables selecting (much) cheaper condos further away from the public transportation.
Fort Collins adds on-street e-bike parking locations without reducing vehicle spots
Hopefully as micro-mobility takes hold, more and more cities will create spaces for parking and charging electric vehicles.
Guys, guys, guys. I was strolling through the never-ending booths full of micromobility companies at the Eurobike 2023 trade show...
A new generation of e-scooters with solar panels means never needing to plug in. Is the trade off in weight and size worth the added flexibility?
It doesn’t take long walking around the Eurobike show halls to realize that eBikes are already here in a big way. All of those eBikes…
Solid state ceramic batteries may greatly advance the future of micro-mobility. They promise higher energy density and less susceptibility to thermal runaway and can be used in a wider temperature range.
'I can't imagine a 13-year-old being able to drive something that can go 25 to 30 miles an hour in the middle of a road. It just doesn’t seem safe.'
>E-bikes are not bicycles
The article makes a strong assertion that e-bikes are something entirely different than regular bikes and should be regulated separately.
Do you think e-bikes should always be allowed to follow the same paths and rules as regular person-powered bicycles? Or should communities treat them as something different?