Skip Navigation
InitialsDiceBearhttps://github.com/dicebear/dicebearhttps://creativecommons.org/publicdomain/zero/1.0/„Initials” (https://github.com/dicebear/dicebear) by „DiceBear”, licensed under „CC0 1.0” (https://creativecommons.org/publicdomain/zero/1.0/)TW
Posts 5
Comments 373
Valve first came up with the Steam Hardware Survey more than 20 years ago because it wanted to know what specs it should target for Half-Life 2
  • How did this work? The way I remember it HL2 was pretty much the first game on Steam. I remember it being really controversial because you had to install Steam to play the game even offline and people didn’t like that. It was like the original Rockstar Social Club.

    How did the survey exist early enough for HL2 to be developed around it?

  • Linux Mint and Steam
  • Can’t really add anything regarding linking the Steam libraries as I just removed all my games from Windows and downloaded them in Linux instead. I used ProtonUp for managing my Proton versions and I started up Cyberpunk using ProtonGE 13, and it runs the same as it does in Windows. I’ve got the GOG version and I’m using Heroic Launcher but I don’t think that’ll make a difference.

    Have you got anything to work using that linked library? Maybe try just installing it locally.

  • Windows VS Linux (part 2)
  • But this is the classic Linux user mentality; Linux shouldn’t get easier, users should get smarter.

    If computers can be easier to use then why should people instead sacrifice loads of time learning how to operate them? Most people have other things to be getting on with.

  • Festive Prescott
  • John Prescott.

    “During the 2001 election campaign, Prescott was campaigning in Rhyl, Denbighshire, when Craig Evans threw an egg at him. Prescott, a former amateur boxer, responded immediately with a left jab punch to the jaw.”

  • Is there a generation of gaming you're just not nostalgic for?
  • Anything pre-NES era and PlayStation. I had a ZX Spectrum, which was a British console that was around in the 80s. It had lots of fun games which were plentiful and cheap, they’d only be a couple of quid each. But most of them were just really basic versions of what we have now and I have no intention of getting my old machine out to play them.

    I’m not nostalgic for the PlayStation because I always felt like the only audiences it catered for were the Japanese and people who liked all that money-grabbing type of stuff, like FIFA. Neither of those were for me.

  • Is there an age where you decide to just 'let it go'?
  • Well most people get a bit like this after they marry. Are you talking about giving up on finding romance? You can still do it when you’re older but everyone’s gonna be divorced with a kid.

    You shouldn’t ever really give up on your health, as you get older you’re gonna need it more and more.

  • Windows VS Linux (part 2)
  • Let’s not cherrypick scenarios to try and pretend Linux is easier than Windows. Most normal people are nervous interacting with a GUI pop-up that gives them two options, never mind putting them into a terminal window where they could seriously fuck up their machine. What about clicking the download link on a webpage, clicking next a few times and having them software on your machine, compared to having to build something from GitHub (how many people here have never had to do that?).

  • Building a new home server
  • I don’t know half that software you’re talking about running but I don’t find home servers really need to be that powerful. Companies like Dell and Lenovo have historically done cash back offers on small tower servers. I’m still running a Dell T20 I got like 10 years ago. Maybe keep an eye out for something like that if you’re not in a rush. I only ended up paying about £100 for mine.

  • Windows VS Linux
  • I had to install Windows 11 on something a few weeks ago so I decided to do it without an account, it was nowhere near as difficult to do it as this sub would lead you to believe. Pressed a key combination to load up the command prompt then typed in a relatively short command. The GUI restarted and that was it.

  • Upgrade to Freedom! The Switch from Windows 10
  • I use it at home just because I wanted to try something different on my laptop, I really don’t understand what some people love about it so much. It’s bot terrible or anything, I just find it a bit clunky and there’s nothing remarkably good.

  • Unable to unlock user

    Morning everybody. I’ve got a server at home running Debian and I handle everything over SSH aside from file transfers for which I use webmin. I’d be trying to get Frigate working on it using Podman but couldn’t get it to find the hardware I was passing to it and got pissed off and gave up, that was a few weeks ago and everything was fine. The Podman container had its own user and I’d set it up so I couldn’t access the containers with any other users, even with sudo. I’ve gone back to it this morning and found that when i try to sudo su in (which is what I normally do) i get “This account is currently not available”. I checked everything my friendly AI hero suggested but I couldn’t figure out why it had locked. The last reference in journalctl was me closing the session and there was no records of failed logins or fail2ban being triggered. I had the ! in the shadow file and passwd was showing me an L to say it was locked. In the end I gave up trying to figure out why it had locked because I couldn’t see evidence of anything dodgy so I just went to unlock it. I’ve tried passwd -u and I’ve remember the ! and rebooted but it still won’t unlock.

    I suspect Podman may have done something but I’m pretty sure I stopped the containers before I last logged off because I got sick of them filling the log files up, and though I’ve rebooted at least once in the last three weeks I don’t know if my containers are auto starting, or what that would do. I can’t even check until I’ve got the user logging on.

    Anyone have any ideas?

    3

    7700 XT a good choice?

    I'm thinking about buying a new GPU. I'm looking at the 7700 xt as it's about £355 and I want Linux support and I like newer features. Before I pull the trigger can anyone tell me why I'm making a huge mistake?

    11

    What email client are you guys using?

    I just can’t find a decent email client that looks like it’s from the last 20 years. Geary and Evolution both appear to be pretty modern but something about using Gmail with a Yubikey just doesn’t work and neither of them will connect to my account. Both on Fedora and OpenSUSE. Thunderbird works but it’s so old fashioned and Betterbird doesn’t look much better. What’s everyone else using?

    160

    Upgrade extruder on old Prusa clone

    Tldr; does anyone know of an upgraded extruder that will fit a Geeetech i3 Pro B?

    Long version: I have a Geeetech i3 Pro B that I’ve had for years now. I don’t exactly use it loads but I do like having it to print random tools and bits for my other hobbies (mostly car bits). The problem is this useless thing just jams up all the time with no explanation. I was using it fine about a month ago and then just came back to it yesterday (actually excited that it wasn’t broken for once and I could just use it), then when I went to change the filament I realised the stupid shit had jammed again. I seem to have a constant rotation of heatbreaks on this thing. Even when I got it out I couldn’t see any reason why it had jammed at all. It wouldn’t be so bad but it’s a total pain to replace since it’s not compatible with the compressions clips. I can’t even see how it could be changed to use one since the hotend is supported by the heatbreak. I looked at somehow modifying an Ultimaker one for it but it looks like it would be tricky to mod.

    I would just buy a new one but if I was to do that I’d want something like a Bambu thing that would make printing much easier, but I can’t really justify spending that much. I definitely don’t want to spend a bunch of money just to end up with something that’s basically the same and will require all the tubing again.

    I better stop writing now as it’s turned into a big rant.

    2

    Guides for working settings for each game

    I’ve dabbled with Linux and I’ve finally decided to try and switch to it for real, mostly because I’m starting a new job soonish that will require more Linux knowledge, but also because I’m getting sick of all the Windows privacy issues.

    I’m actually liking it better than I thought. Taking an attitude that I’m sticking with it is giving me more of a drive to actually fix the issues I’m having rather than moaning about them, and it’s a good opportunity to learn.

    The one thing I’m struggling with though is gaming. I’ve got a 2060S which I need for CUDA, but I’ve got the drivers working. I’ve not exactly been through my whole Steam library but I’ve not had anything running acceptably yet. DEATHLOOP, for example, on Windows runs at smooth at near 4k. On Wayland the input latency is unplayable and it crashes out every few minutes anyway. I improved it by switching to X11 but I’m still only getting 10-15 FPS when it was smooth in Windows. Even Skyrim has input latency and it’s clearly not running as fast as it should be.

    When I check on ProtonDB for help I see no consistency in the settings people are using. Most of the time they just say Experimental, and I figure that changes over time anyway so it’s no help to me anyway.

    Is there any helpful advice online as most of the time I just get told to try every proton version and fork until I find something that works? I’ve not even gotten into figuring out what stuff like Lutris is.

    I’m on Fedora in case that’s important.

    16