IT IS FOR WATER CONSERVATION: The larger lever is to flush out around 6 to 9 liters of water, whereas the smaller lever is to flush out around 3 to 4.5 liters of water. Clearly, the larger one is to flush solid waste and the smaller one is to flush liquid waste.
ITT: A lot of Lemmy users showing their true colors. Someone asks for help, for information, and y'all decide to mock.
OP: one button does a full flush, the other does a half flush. In your picture, the button on the right, does the half flush. Button on the left, does the full flush. Full flush is usually just x2, though I don't think that's a hard rule.
Actually the little button sends an SOS to local authorities, so chances are the little button works fine and you have an incoming SWAT raid with paramedics and police surrounding the building.
This is boringly not always true, for a while some genius, probably Elon Flush, decided to invert the functions so that when you pushed the bigger button you got the small flush.
Ultimately I think my question, being smart or dumb is irrelevant, it brought activity to the community and that's a great thing I think.
The bad thing was the memes. The 'how do I flush this' posts kinda got wild.
This is your standard dual flush. One is flush, the other is eject. Which is which depends on the manufacturer. Just be careful, the eject can be quite forceful.
As for which button is the right one, it's definitely the one on the right. The other is the left button.
This is so wholesome, never be concerned about asking questions like this. Most folks are lurkers, I'm sure your question educated more folks than you realize. Be well out there.
Nowadays I just don't know anynore. I find toilets where it's swapped.
I also want to say that I grew up with toilets where the bigger button is the one for your more common usecase - liquid waste. Oftern the smaller button is set up to push the bigger button as well - to clean solid waste.
If using a new toilet, I always try out the bigger button first, since it's easier to press and typically uses less water.
Only a filthy Star Wars nerd would want to use hyperdrive!
/uj Star Wars has some good and interesting themes, and none of it has to do with FTL technology. If you want a superior version of the same technology with more depth and dramatic implications, look at Halo. If you want what George Lucas was trying and failing to plagiarise, look at Dune. If you want to arbitrarily move around at whatever speed the plot demands or instantly, look at Stargate. And if you want a military fantasy, look at Star Trek. Hyperdrive is an inferior compromise between all four of these better written FTL techs that fails to execute any one idea well. Which is perfectly fine, because Star Wars isn't about hyperdrive. It's about taoist/buddhist philosophy, political commentary on fascism, and the power of individuals in the face of overwhelming systems and impossible odds. None of that has anything to do with how fast a ship moves, the hyperdrive is just a plot device that lets us skip the boring stuff and have more of the stuff Star Wars is actually good at.
So the smaller seashell shape makes a small flush. The larger seashell shape makes a bigger flush, and the combined seashell shape (both buttons) makes a huge flush.
People are joking about this but I have a toilet where the large button is for a half flush. Pressing the small button depresses both buttons performing a regular flush.
I have never found another toilet like this, thank the stars!
I am also in the large button, small flush gang. I assume it's that way so the flush you use most frequently is bigger, but it does seem counterintuitive.
From my experience, the large button does the flush, but the size of the flush depends on how far you push it down. The small one simply pulls the large flush button down with it, but stops it from going more than half-way, resulting in a smaller flush.
Allow me to introduce you to the scientific method.
Observation: The buttons are different sizes.
Hypothesis: The size of the buttons could indicate the amount of flushing that occurs when the buttons are pushed.
Experiment: video record the amount of flow resulting from the pushing of the one of the buttons. Wait 60 seconds. Record the amount to flow resulting from the pushing of the other button. Wait 60 seconds. Record the amount of flow resulting from the pushing of both buttons simultaneously. Then compare videos.
Conclusion: __________________
The ones I've seen have symbols like "I / II" on the buttons, so you know which is which. Others here have explained the purpose. I guess in your picture, the #2 button is the bigger one.
It's a smaller button inside a larger button (sort of), the smaller (right) button you push to flush your urine and the larger (left) you push to flush your excrement. I've used these many times but if I'm honest I've never actually been sure if they work.
A lot of the comments are making the assumption that the buttons are telling the truth about being different sizes, but I've flushed plenty of toilets where both buttons do a full flush. If you can't tell the difference after experimenting, it might just be broken or cheap tat.
The way these flush mechanisms work is adjustable. It's entirely possible that someone adjusted them to have both have similar volumes for whatever reason
One of the buttons might have been the "evacuate bowl onto floor" option. Aren't all toilets like this? Flushing was a fun adrenaline-fueled adventure the first time before I knew which button was which.
It's a dual flush toilet! They give you an option to make the toilet do a full flush or a half flush. The smaller button operates the small flush, while the larger button operates the bigger flush! The smaller flush is better suited to use when you pee, since it requires less water to flush away.
A selfie I took one autumn morning in 2005. It's the only reasonably normal and presentable picture of myself, as I'm generally not a very photogenic person, so I use it a profile picture everywhere.
The toilet I am currently sitting on has a very similar set up. The toilet came with the house, and I haven't been able to discern a difference in the 8 years I've lived here.
NSFW is short for not safe for work. The tag is to be put on pictures or texts that shouldn't be viewed when there's a chance of someone else glancing at your screen. I think a picture of a toilet while could raise some questions does not fall into that category.