Post your setup. no matter how uggo
Post your setup. no matter how uggo
Only use jellyfin. Have a list of things want to update... but it works for now.
Yes that is a laptop usb cooler used as supplemental placebo cooling. Also a pc fan I have propped up against the hard drive feeding into the pi.
Can't recall last time used the ps4 or switch. But they're there
-
Seven Raspberry Pi 4's and one Pi Zero, mounted on some tile "shelves" inside some IKEA furniture.
-
-
What do you do on that many pi's that could not be done easier on 1 x86 box?
-
-
My 12u setup On top I have two pi's; home assistant and pihole The ONT for fiber, hue bridge, and hdhomerun.
My dream machine pro
Patch panel
48 port switch i got from coworker
Patch panel
My unraid server
jbod
Battery UPS-
Ok, now this is just showing off. Patch cables all the exact required length and everything all nice and neat. I bet you check your backups regularly and do a monthly DR fail over test too.
...Kidding aside, your setup looks really good.
-
-
An old HP laptop with Debian hosting Klipper and Home Assistant. Waiting for an OTG cable so I could replace the laptop with a phone for less power and heat-
Using phones with a continuous power supply might do nasty things to the battery.
Source: I finally figured out how to open a glass back phone with no tools.
-
For what its worth, some Samsung phones can stop charging while the plug is in, while also not disconnecting anything on a USB dock (such as internet)
-
-
Wait I see EMT piping for that printer frame... Did you convert an Anet A8 to an "EMT-8" like I did!? :D
Just seemed like a neat coincidence!
The stock A8 was such a scary fire hazard lol.
-
-
My little cluster
-
Optiplex gang represent
-
That's so weird at first look on this picture I was like: "What's O...P...D? 🤔" LOL
-
-
Cupboard + DiskStation + OptiPlex = Win
-
Got the same optiplex to eventually replace the pi.
Nice and clean.
-
Very easy to find good deals (and parts) on these 1L business PCs!
-
-
-
Could I interest you in some diagonal bracing today?
-
was going through some old pictures and decided I'd post a retro setup. pretty sure I took this picture with my android g1....so 2008ish?
here is a pic of one of my first selfhost setups. I began selfhosting for music and have never stopped. this iteration was stuffed behind a bar that was built in to the basement at my old house
the old fashioned was custom built and was running some flavor of windows server. the one on the floor was the first Linux server I had run to do something useful...torrents and subsonic IIRC. I pieced that server together with random parts, mostly donated from old family PCs. two UPS units were on the bottom rack of that metro shelf to battery back the servers and the tomato router out of frame.
-
That monitor looks so sexy.
-
oh, she was. found her several years earlier in a trash pile at an office building I was working at.... with the protective plastic still stuck on the screen.
she met her doom against a concrete floor during a studio shuffle.... sad day.
-
-
Man this picture is such a vibe lol. Love it. :D
-
-
lmao mine looks simple af compared with most people here.
Behold my server :
Hardware:
-
Rasberry pi 5 8GB
-
1TB raid between old drives ( one from PC the other a just a regular external WD hard drive ).
Services
- Wireguard VPN/wg-easy
- AudioBookShelf
- Freshrss
- Vaultwarden
- Navidrome
- Calibre Web
- Actual Budget
- Trilium notes
Everything in containers, if you want to know more check this blogpost.
-
Nothing wrong with simple! If it works for you that's all that matters!
-
Oooo I should do something like this! Right now I have a Pi 4 with OMV and just OMV on it. It’s even running on a SSD. It could do so much more!
-
What made you go with a RPI 5?
-
Right now I don't have much to tinker with, so I got something that down the line would serve that role.
Why the 5 specifically, instead of the 4 or other SBC came down to pricing in my region, raw power, and the PCIE slot in which I intend to put a nvme when upgrading my laptop.
-
-
mine is a pi 4 but basically the same, just shoved inside a box for protection
-
-
-
messy asf, a proper hobbiest system
-
This one gave me the confidence to post my setup, I salute your bravery (°_°)7.
The best of luck with your future insurance claim.
-
Hey it works!
To be fair I just moved and had to get Plex back up for the wife and audiobookshelf back up for me asap! Should look better soon
-
-
-
Just a NAS for now. Plan to add PiHole at some point.
-
Runs Debian Bookworm
Hosting:
- DNS server
- DHCP server
- web server (just some internal pages)
- print server
- file server (24TB RAID 5 managed with OMV)
- immich
- jellyfin
Probably some more stuff I'm forgetting. It's basically my everything box.
-
This is how I started in a tiny room. I am not proud, but maybe good to show between all the shiny things here.
-
Christ Almighty
-
-
Below, a picture of my small rack, which is located in my home office. Due to the selected components, it is virtually silent and still bobs along at only 26 - 28° C.
The hardware is divided into two Proxmox clusters. The first consists of the three Lenovo M920qs shown here and is home to my publicly accessible services and VMs, the second consists of the two Beelink EQ12s and is responsible for the internal services or those accessible via VPN.
Not the greatest or best Homelab, but for me, it fulfils all my needs and at the same time keeps the electricity costs down to an unimaginable level.
I host the following services on the public Internet:
- Ghost CMS
- Mastodon
- Pixelfed
- PeerTube
- Lemmy
- Rallly
- Nextcloud with Collabora Office
- Rustdesk
- Umami
- Uptime Kuma
- Vaultwarden
- Whoogle
- Minecraft Server (for my son)
Internally, I also provide the following services:
- AdGuard Home (redundant)
- FreshRSS
- Homepage (Dashboard)
- Jellyfin
- the Arr's
- Linkwarden
- WireGuard
- Zoraxy
- ChangeDetection
- Forgejo
- MeTube/AnonymousOverflow/ProxiTok/RedLib/SafeTwitch/LibMedium
- Grafana/InfluxDB/Prometheus
- Homebox
- IT tools
- Mealie
- MiniQR
- Speedtest-Tracker
- Wallos
- Web-Check
-
Any chance on getting more info about the hardware specifics? From the sounds and looks of it this is almost exactly the scale of what I’d like and running pretty much the same things I’m thinking interested in.
-
You’re very welcome! I’ve provided a detailed overview of my entire setup on my blog, and following your request, I’ve updated it to reflect the latest changes.
You can check out the post here: https://blog.klein.ruhr/my-homelab/
-
-
Wait so you have like rack mounted server but only run jellyfin? Am I missing something here ?
-
There's no rack mount server there. I see a UPS, switch (network and Nintendo varieties), PS4 and mini PC
-
My bad. I’m so dumb that I see a shelf UPS and I assume this is some advanced network shit. I have an old gaming pc and a mini pc as 2 nodes in my home network.
-
-
I had the same thought - an entire 8U rack to hold a single raspberry pi with an external drive?
-
Come on guys, that’s a whole 8TB.
-
There's no rules here
-
-
This table rack was the most space savey option i could find. It looks less stable than it is. It is super minimal as far as the actual self hosting stuff goes.
Room to expand eventually.
-
Wait so you have like rack mounted server but only run jellyfin?
What would be wrong with that?
-
Its a rack mounted rack without the server.
-
-
- Old Synology NAS for storage
- Optiplex 7060 running jellyfin, paperless, *arr stack, handbrake, ripper, maybe some other containers.
- NUC5 running nextcloud (nextcloudpi) baremetal and an audiobiokshelf container
-
-
noice
-
That's a nice setup. I am weirdly jealous of the sliding shelf. The CS350B is very nice as well.
-
-
Old setup:
Lenovo ThinkCentre M900 that I bought refurbished for ~€130
- i5-6500T (Passmark score 4792)
- 8GB RAM
- 512GB SATA SSD + 128GB SATA SSD (completely used for swap)
- Buffalo DriveStation™ HD-WLU3 that I bought second hand for €10
- 2 × 2TB SATA HDD's in RAID 1
- ~20W
New setup:
Custom build
- ASUS Prime N100I-D D4 (Passmark score 5501) (~€100)
- 16GB RAM - Crucial CT16G4SFRA32A (€28)
- 512GB SATA SSD
- 4 × 4TB SATA HDD's in RAID 5 using mdadm (€160)
- M.2 NVME to SATA 6x (ASM1116 for C-states) (€17)
- 17.8W
(Not the Proliant Microserver Gen8 on top, the device below)
The antennas are from a Sonoff Zigbee dongle and a bluetooth dongle for Home Assistant.
I've mostly focused on power usage, price, and reliability since I'm a student and don't want to spend a month's worth of income on a "home lab".
It's running the following:
- Forgejo
- Grafana
- Home Assistant
- Jellyfin
- Kopia
- Nginx-proxy-manager
- Paperless NGX
- Photoprism
- Syncthing
- TimescaleDB
- Uptime-kuma
- Vaultwarden: As backup
- Watch Your LAN
- Arr stack (currently disabled)
- Homebox: Still up for testing, like it has been for the past couple months. It's a great concept but the execution ain't great (does anyone happen to know an alternative?)
It's using about 10% CPU and is running below 40°.
-
I have three of those Proliant Microserver Gen8's. Two of them are part of my Proxmox cluster, and the other one is waiting for me to install Proxmox on it.
-
I'm currently just using it for occasional backups (it has 12TB storage) since the power consumption (60W idle when in the BIOS) is just unreasonable.
-
-
The basement network and storage/server racks.
Heavy lifting boxes…
-
Why on earth do you have so many DVD drives. Also, are you using Windows?
Sorry to be so judgmental
-
I own over 4k titles in physical copies. So probably closer to 5-6k discs. As the other person said…backups. I’ve already found a few degraded discs as I’ve been working through.
Pretty much everything in the basement is some variant of linux. Couple more boxes(not pictured) higher in the rack that are just recycled desktops in rack mount cases. Some of the other stuff is windows because of the software being used. I use Mac stuff at work cause that’s what they provide. I don’t really care what OS. I just need it to work and the quickest way for me to get whatever it is done. I’ll reformat stuff to whatever when this project is done and I move on to the next.
-
Probably bought an old Redbox and is making a local backup of all the disks
-
-
Is that a Unifi PDU/UPS? Didn't even know they made these.
Also, you need to peel the stickers of the screens.
-
That is what it is. My older CyberPower unit is down below. Was just easier to manage it all from one place. Need to repurpose that or sell it off…
The screens work fine with the stickers on. Never saw the point in peeling them off.
-
-
Probably bought an old Redbox and is making a local backup of all the disks
-
-
-
So nobody is going to ask about the rotary phone?
-
It's a GPO 706, which is a classic British bakelite phone from the '60s. I have it hooked up to a SIP trunk through an OBi 100. Right now it can receive calls but not make them because I haven't gotten around to sorting out a pulse-to-tone dialing converter yet.
-
Oh yes the bright red rotary phone...I imagine if it's ringing, something has gone terribly wrong.
-
Be the change you wish you see in the world. :)
-
-
-
Top to Bottom:
- 48port Patch panel
- Cisco 2990 48 port Poe
- 48port Patch panel (future)
- Cisco 2990 48 port Poe (future)
- 24 port patch panel (spare)
- Pfsense 2.5gb eth minipc
- 4u server 20 bay (proxmox)
Bottom area:
- 2 mini pcs (proxmox)
- PiKVM and ezcoo switch connected to all PCs
- Couple of UPS
The access to the crawlspace isn't great so the CrapRack tm had to be assembled in the crawlspace.
-
Yo dawg I heard you liked patch panels
-
Ha indeed, every room in the house is getting 2 faceplates (on roughly opposite sides of the room) with 4 Ethernet that runs each back to the server rack. Is every room having 8 runs right back to the switch excessive, you bet.
In my old place I had one faceplate with 2 ethernet, coax and phone to each room, but phone and coax is useless and I didn't have enough Ethernet.
-
-
Hope you grounded your hardware to the wood.
-
This is a custom built mini PC, with a mini-ITX motherboard and an Intel N100 CPU. It gets powered by a power supply that I got from an old computer. Also, it needs no active cooling, just a heatsink. It almost never gets above 60°C.
(and yes, it has no case).
In it I run:
- Jellyfin
- All of the *arr stack
- Pairdrop
- My website
- My personal Lemmy instance
- Immich
- Pi-Hole
- Home Assistant
- Grafana/Prometheus/Node-Exporter stack for monitoring
-
From top to bottom:- Patch panel (with artisinal, handmade cables)
- TP-Link managed switch Shelf 1:
- PFSense 4 port firewall
- Lenovo m910q w/Proxmox (cluster node 1) running 2 VMs for docker hosting: Ubuntu for media stuff (arrs, navidrome, jellyfin, calibre, calibre-web, tubesync, syncthing) and Debian for other stuff (paperless-ngx, vikunja, vscodium, redlib, x-pipe webtop, fasten health, linkwarden, alexandrite), 1 Win 10 VM for the very few times I need to use windows, some Red Hat Academy student and instructor RHEL 9 VMs, and an OPNsense VM for testing Shelf 2:
- HP Elitedesk G5 800 SFF w/Proxmox (cluster node 2) with an Nvidia GT 730 passed through to a Debian VM used primarily as a remote desktop via ThinLinc, but also runs a few docker containers (stirling pdf, willow application server, fileflows)
- Shuttle DH110 w/Proxmox (cluster node 3) with 1 VM running Home Assistant OS with an NVME Coral TPU passed through as well as a zooz 800 long range zwave coordinator (the zigbee coordinator is ethernet and in a different room) and two LXCs with grafana and prometheus courtesy of tteck (RIP) Shelf 3:
- WIP Fractal R5 server to replace the ancient Ubuntu file server to the left (outside the rack, sitting on the box of ethernet cable) that is primarily the home of my media drives (3 12 TB Ironwolf drives) and was my first homelab server. The new box will have a Tesla p4 and RX 580 GTX, i7-8700T and 64GB RAM in addition to the drives from the old server. I'll be converting the Ubuntu drive from the old server into an image and will use it to create a Proxmox VM on the new server, with the same drives passed through. Bottom:
- 2 Cyberpower CP1000 UPS with upgraded LiFePO4 batteries. The one on the left is only for servers and only exists to give the servers time to shut down cleanly when the power goes out. The one on the right is only for network devices (firewall, switch and the Ruckus R500 out of shot mounted higher in the closet)
-
Small, 10 inch rack, with some 3D printed rack mounts.
-
This is great. I have couple of those HP machines which are awesome but was just stacking them on my desk. 10 inch rack will be great for them. Need to do some hunting.
-
My HP has a 65 watt CPU built in, when it's running at full load it is quite loud.
-
-
-
-
What are those machines on the floor?
-
The meat and potato's of my homelab. It is just a Proxmox cluster hosting some things.
Most of it is pretty ordinary as I just have a bunch of Debian VMs hosting docker compose. Ansible for deployments and I am working on moving completely to NFS for storage.
The two notable things I have is a virtualized NAS running TrueNAS and a virtualized desktop running Linux Mint. The NAS has a pcie sata controller passed though with two SSDs and the desktop has a RX580 and the USB controller passed though. The tower seen in the back has both of those currently and what you can't see is my monitor, keyboard and mouse.
Here are the services I'm running:
-
Jellyfin
- For movies and live TV
-
Nextcloud
- my files and the Nextcloud suite
-
Matrix
- not really used much
-
my website (it is not much at the moment)
-
I'm using busybox http
-
Graphana and Influxdb
-
monitoring. I will eventually move to something else.
The hardware is the follows:
-
Dell precision tower with a i7-6700k and a standard ATX power supply
-
Lenovo think center with a i5-8500
-
HP whatever its called with a i5-8500
Also the router and my AP (not in picture) is running OpenWRT with vlans
-
-
-
-
mostly runs jellyfin for a group of about 30 users (2 or 3 on at most times). runs alpine on bare bones. the box was originally filled with foam cutouts from storing iPads in a school district I worked at. I figure it's 20tbs of storage and 16gb ecc is a welcome upgrade. it stays cool cause I cutout half the side and put an AC fan in there. future upgrades involve the Nvidia k40 card I have, but I need to design an active cooling system for it before it can be installed as that thing gets HOT
-
I'm impressed that you can handle that many jellyfin users
-
-
I just got 10 Gbit internet last week so I had a chance to tidy everything up. The ThinkCentre is the 10 Gbit router, the Synology actually hosts everything.
Also finally labeled all the mystery cables. Also replaced the proprietary 20V/12V bricks for the ThinkCentre and 10G Fiber ONU with USB-C adapter cables to keep things tidier.
-
Rack server on a lack IKEA table.
-
Nice DJ controller you got there 🤓
-
-
My tech stack:
And my storage NAS:
Bottom NUC: General compute
Top NUC: Proxmox with homeassistant, windows server and debian
Raspberry Pi4 inside N64 case: PiHole
Access Point: Unifi Pro
PC for gaming: R7 7800X3D + Nvidia 3070 inside Fractal North
NAS: Ugreen 4800+ with 4x 15TB drives for a total of RaidZ2 30TB usable storage. Used as NFS storage for proxmox.How it started: 2 8TB external HDDs connected to my bottom NUC.
Primary applications:
*arr Suite, Jellyfin, several minor apps. -
Not taking a picture, but here's what I have:
- Ryzen 1700 in a giant case sitting on my desk (desktop PC is on top of that in a mini-ITX case); 2x 8TB HDDs, connected to network over Wi-Fi; hope to cut the size significantly once one of our ITX boxes need an upgrade (both Ryzen 5600s)
- Mikrotik router (5 port) and Ubiquiti AP sitting next to my bed; Mikrotik handles my local static DNS for my public services
Running:
- Jellyfin, as well as Samba and some other NAS stuff
- HomeAssistant (nothing monitored though, but I plan to add my Sensi thermostat soon)
- Actual Budget
- Nextcloud
- Vaultwarden (currently unused, plan to switch soon)
I also have a VPS to get around CGNAT, and I have a Wireguard VPN configured so communication is encrypted.
Plans:
- upgrade NAS to either a mini-ITX motherboard or a mini-PC w/ external USB-C enclosure
- actually run Ethernet - have been putting off for years
- configure my Sensi thermostat in HA and maybe get some other smart home crap
- use Nextcloud more - want to get SO using the notes app so I can finally kill Google Notes for shared shopping lists
- port my PF spreadsheet to LibreOffice and actually learn to use LO Calc (currently using Google Sheets); I use GoogleFinance func for stock quotes, so I need to replace that with some other workflow (mostly rebalancing investments)
- replace our TV or at least have an alternative for Jellyfin - the config disappears whenever our TV WiFi screws up, which is like 2-3x/month; screw you LG...
So yeah, somewhat simple. My family likes Jellyfin, but I haven't really gotten them on board with anything else.
-
-
Damn that's alot 😅😂
-
Fascinating
-
I need the 2nd cable from to top right to the front bottom left ;)
-
-
You people are such nerds. Wish I could self-host too.
-
You can get a setup going on whatever personal computer until you throw ~$150 on a mini PC.
-
I know!. I watched a few videos but I'm affraid I lack some programming skills for now. Or it would requires that I have a few days off and be in great mood haha. I have a few computers that would probably work, what I would need is someone by my side to help me troubleshoot whatever wont work. You guys already made me switch to linux which I wouldnt even have considered a few years back lol. Super happy, but it's always a challenge when something stops working. For example, after the last kernel update, I spent hours trying to get bluetooth to work again, and in the end buying a new adapter was the only thing that worked. But one day I will self-host too!
-
-
Well you are here so that's a start
-
-
Here's my messy-cabled 9u rack.
It has:
- Fiber gateway out of view on top of the rack.
- Switch, which also powers 2 Ruckus APs and 2 other switches.
- Mikrotik RB5009 router.
- Raspberry Pi x3 all running Debian Bookworm. I have too many pis right now, running Home Assistant, LibreNMS, Log collection, and a read-only NUT server that orchestrates shutdowns and startups on power loss. I need to consolidate these.
- 1L PCs. One is on Debian serving media and files. The other is a test server where I'm trying out Immich on openSUSE. I'm considering moving to that and rootless podman for services. To that end I have another of these 1L boxes on my desk trying other options (MicroOS, Fedora IoT, maybe others).
- HDs. These are backup drives for the 1L server. I keep them powered off except when needed.
- UPS and a managed, switched PDU.
Everything is set up for low energy consumption (~90w), remote admin, and recovery from power loss.
-
My dusty Intel NUC 10:
With a 2TB USB drive plugged in on the right there.
Runs all these services via Docker like a champ: AudioBookshelf, Dockge, File Browser, Forgejo, FreshRSS, Immich, Jellyfin, LemmySchedule, Memos, Navidrome, Paperless NGX, Pihole, Planka, SideQuests, Syncthing, Wallos
-
I feel like this should be a quarterly post. Really liking all these setups.
-
Testing an image post from Voyager client...
I only own the gear marked A and B, which lives above the couch I call home.
A is my web services 24/7 Proxmox box, an Intel 8500T; 2 routers; an 8TB HDD; and a Back-UPS Pro so old its ethernet surge protection is rated for 100bT, with a brand new LFP battery in it. The UPS powers both A and B.
B is my personal Proxmox box, an AMD 5750GE, which I use for development and running desktop OSes which I remote into, plus a GL.iNet Slate AX router. These come with me if I stay someplace other than the couch (not pictured). That's why they're on different shelves. Also, there's a USB wifi dongle w/antenna connected to B which I used when some stupid website demands I drop my VPN (all traffic from everything pictured is routed thru 24/7 private VPN endpoints, aka a $2/mo VPS or three).
-
Ikea shelf instead of a rack, but I used metal shelves for better thermals!
Top to bottom:
- Unifi ac
- Brother printer
- Sunshine streaming machine
- ftth 1 / 2, unifi GW pro
- AVR, UPS, Synology NAS
-
The range of sofistication in this thread is actually kind of breathtaking
-
Comment 1: a small raspberry pi
Comment 2: full rack with tens of thousands worth of hardware
-
I love it. I've seen shit that has literally had my mouth agape to the piles on the floor like little gremlins ater my own heart.
-
-
From top to bottom:
- Allpower Power Station (UPS with around 4 hours of battery)
- Unifi gateway
- Unifi switch
- Unify CloudKey (Surveillance)
- Patch panel
- 1.5U media server
- Arock Mini running stuff like my Lemmy instance and other self hosted software.
I’m planning to move my Lemmy instance to its own 1.5U.
The whole setup uses around 80-100 watts.
-
Is that actually an UPS or just a backup battery? Can it passthrough the line power directly or does the inverter need to run 24/7?
In the latter case you might want to check how much power the inverter eats just by itself. For example, my Bluetti with 2 kWh needs a whopping 50W in idle just to keep the AC ports powered. Of course your unit looks much smaller so it should be way less but still worth measuring.
-
It does do actual passthrough and I also measure wattage directly from the outlet.
-
-
literally one these with loads of RAM and a wifi card, so i can fit all the shenanigans in one box
-
What is the Wi-Fi card for? What software are you using?
-
so it can also be my wifi ap, im using virtualized openwrt to make it happen.
the ap i was using is now doing its duty as an extender while the beefier one does firewall, wifi, server, storage you name it...
-
-
Used it for Minecraft server for a week then never used it again. Don't know anything it would be good for that my computer can't already do better tbh
-
16TB btrfs (+ECC RAM) on Debian 12.
-
Simple, elegant, rock solid. Very nice. :) Love your decals too!
-
-
The disks are the most uggo part. They’re a bunch of old disks of varying sizes with a RAID+LVM setup to make the most use of them while still being redundant.
lsblk output of the whole thing
saiko@vineta ~ % lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS sda 8:0 0 111.8G 0 disk ├─sda1 8:1 0 512M 0 part /Volumes/Boot └─sda2 8:2 0 111.3G 0 part /nix/store / sdb 8:16 1 372.6G 0 disk └─sdb1 8:17 1 372.6G 0 part └─md1 9:1 0 1.5T 0 raid5 └─storagevg-storage 254:0 0 6.3T 0 lvm /Volumes/storage sdc 8:32 1 465.8G 0 disk ├─sdc1 8:33 1 372.6G 0 part │ └─md1 9:1 0 1.5T 0 raid5 │ └─storagevg-storage 254:0 0 6.3T 0 lvm /Volumes/storage └─sdc2 8:34 1 93.1G 0 part └─md2 9:2 0 279.3G 0 raid5 └─storagevg-storage 254:0 0 6.3T 0 lvm /Volumes/storage sdd 8:48 1 4.5T 0 disk ├─sdd1 8:49 1 372.6G 0 part │ └─md1 9:1 0 1.5T 0 raid5 │ └─storagevg-storage 254:0 0 6.3T 0 lvm /Volumes/storage ├─sdd2 8:50 1 93.1G 0 part │ └─md2 9:2 0 279.3G 0 raid5 │ └─storagevg-storage 254:0 0 6.3T 0 lvm /Volumes/storage ├─sdd3 8:51 1 465.8G 0 part │ └─md3 9:3 0 931.3G 0 raid5 │ └─storagevg-storage 254:0 0 6.3T 0 lvm /Volumes/storage └─sdd4 8:52 1 3.6T 0 part └─md4 9:4 0 3.6T 0 raid1 └─storagevg-storage 254:0 0 6.3T 0 lvm /Volumes/storage sde 8:64 1 7.3T 0 disk ├─sde1 8:65 1 372.6G 0 part │ └─md1 9:1 0 1.5T 0 raid5 │ └─storagevg-storage 254:0 0 6.3T 0 lvm /Volumes/storage ├─sde2 8:66 1 93.1G 0 part │ └─md2 9:2 0 279.3G 0 raid5 │ └─storagevg-storage 254:0 0 6.3T 0 lvm /Volumes/storage ├─sde3 8:67 1 465.8G 0 part │ └─md3 9:3 0 931.3G 0 raid5 │ └─storagevg-storage 254:0 0 6.3T 0 lvm /Volumes/storage └─sde4 8:68 1 3.6T 0 part └─md4 9:4 0 3.6T 0 raid1 └─storagevg-storage 254:0 0 6.3T 0 lvm /Volumes/storage sdf 8:80 1 931.5G 0 disk ├─sdf1 8:81 1 372.6G 0 part │ └─md1 9:1 0 1.5T 0 raid5 │ └─storagevg-storage 254:0 0 6.3T 0 lvm /Volumes/storage ├─sdf2 8:82 1 93.1G 0 part │ └─md2 9:2 0 279.3G 0 raid5 │ └─storagevg-storage 254:0 0 6.3T 0 lvm /Volumes/storage └─sdf3 8:83 1 465.8G 0 part └─md3 9:3 0 931.3G 0 raid5 └─storagevg-storage 254:0 0 6.3T 0 lvm /Volumes/storage sr0 11:0 1 1024M 0 rom-
Pretty clean
-
-
A simple homemade NAS, mostly for hosting my Plex library, VPN+torrent and cloud.
The synology needs to be emptied, removed and sold.
The m2 Mac mini was hosting some docker like pihole and actual budget but those are now on another Mac mini used as a workstation, so this one will be sold as well.
-
How's your experience with actual budget been? I've been considering it and am currently using YNAB.
-
I made the switch from YNAB cause !fucksubscriptions@lemmy.world
I only had a small understanding problem at the beginning but then I quickly managed to replicate my YNAB (and import the data).
Now that I’m used to it I don’t see any problems and I like it. I believe you can try it locally without running the server version.
The lack of mobile app could be a downside but I don’t budget on my phone.
-
-
-
Running TrueNAS with 4TB usable mirrored storage, 32GB RAM, and an i5-7600. Mostly holds backed up files from my switch from Windows to NixOS. I've got it running Frigate with a Coral TPU, Gitea, Homer, Unifi Controller, and Uptime Kuma. I was managing some helm charts on the TrueNAS k3s cluster with flux but conveniently dialed back to only using their built-in apps right before they removed it in favor of docker only.
For the network I'm running OPNSense on a Protectli device with Ubiquiti Unifi for the wifi. The native WireGuard integration on OPNSense is pretty nice.
-
So mines a weird hodge-podge of a HP Proliant (running my modded Minecraft server and Plex) under a bistro table that I use as a standup desk. A HP Thinclient that I run lighter services like my Pi-Hole and Homebridge. and a laptop
-
The small board you can see is a pi hole
I do have more tech elsewhere but this pile is comically ugly
-
Orange pi zero?
-
yep! good eye
-
-
Extra points for not lifting the spagetti pile when you're hovering.
-
-
Mines nothing special, i5 10400 with 16GB of RAM and a 1050ti for video encoding. System runs TrueNAS Scale for Plex and Immich and has 44TB of drives running through a Dell H310 PERC SAS card. I desperately need more storage but I've been lacking the funds for new drives, I'd also need a 5.25" drive bay converter to hold the 2 additional drives I need in this case since all the bays are full, and another SAS card since this one's used up.
I'd like to move to Jellyfin but from what I've read it doesn't do as well for streaming from outside the network compared to Plex and half the users of my server are outside my network. So it works for now.
Also have a Raspberry Pi 5 running PiHole
Also a buddy 3D printed a fan mount for the H310 to make sure it doesnt overheat when doing file transfers and I slapped a Noctua on it
-
Synology NAS running media server + live document editing server + seedbox. Plans to eventually build a proper server for it. Can't wait until my setup looks like the rest of yours.
The alebrije on top protects from bad torrents (only linux isos :v) and viruses.
-
Iteration one, the original https://drkt.eu/library/Museum/old_website_hw.jpg
Iteration two, taking it seriously https://drkt.eu/library/Museum/ye_olde_server-rack.jpg
Iteration three, evolved LACK rack https://drkt.eu/library/Museum/new_apartment.jpg
Bonus https://drkt.eu/library/Museum/backside_mess.jpg
'Artemis' Server MOBO : GigaByte MB GA-Z170XP-SLI CPU : Intel Core i5 6600K 4c/4t RAM : 2x DDR4 8GB CL14 2133 Kingston HyperX PSU : ## TO BE ADDED ## Storage - SATA : SSD 2TB - SATA : HDD 4TB - SATA : SSD 1TB 'Deimos' Server MOBO : ASRock H81M-ITX CPU : Intel Pentium G3220 2c/2t RAM : 2x DDR3 8GB C8 1600 Crucial Ballistix OC PSU : ## TO BE ADDED ## Storage - SATA : HDD 300GB 'Phobos' Server MOBO : Intel H81 Express Chipset CPU : Intel Core i3 4330T 2c/4t RAM : 2x DDR3 4GB 1333 PSU : 65 watts AC/DC adapter Storage - SATA : SSD 2TB -
Damn, that's actually pretty sexy for a fresh-air rack How's the noise levels?
-
My dirty data diddler. 10+ yr old amd octacore black running at 4ghz. 4TB of writeable space in it. HD and SSD mix. Old sb xfi audio running to a BT5.0 USB dongle for my games and music. Pioneer CD/DVD writer. Yes I still burn CDs and DVDs for my music and backup purposes heh. White cable on the right hanging vertical is a USBC data/charging cable. The squirrely wires lefttoright are a power line for a digital clock I'm gonna hang on the wall soon.
-
https://lotide.fbxl.net/api/stable/posts/165851/href
My whole empire, made almost entirely of parts scavenged from roadside signs. (not a single fan on the whole setup)
-
Roadside signs? Hah! what processor do they have?
-
The two top ones host invidious, searx, and yacy on one and lotide (what I'm talking to you on) and matrix on the other, they both have Intel Atom D2550s. The bottom one has an Intel Core i5-4570TE, and hosts basically everything else including my reverse proxy server.
At some point I'd like to move to low-end ryzen embeddeds, because they are either as powerful or more powerful than anything I have and remain fanless, but one step at a time (and finding something that powerful that's inexpensive and scavenged from a roadside sign is tough sometimes)
-
-
Very tidy!
-
-
The cable modem is no longer in use, finally got fiber in my neighborhood but the ONT/GW is in the basement. Beelink is my single (for now) proxmox node, HP is running Plex w/ Intel iGPU for transcoding. DS220+ NAS w/ 2x 16TB drives. Unifi switch 8 and USG-3P (fiber ONT/GW passes through to that and it's soon to be replaced with a Palo Alto 410, thanks to work) and then another Unifi 8 port lite in my basement office where the ONT/GW lives. Nothing special, very ugly but I hope to upgrade the wired network to 10g in the future to support a proxmox cluster and my ISPs 5Gbps offering. Also plan on converting my old desktop into an Unraid box since I can get a lot of drives from work and don't really want to stick with the Synology.
-
I’m in the middle of moving so everything is packed up. But this was the rack before we moved.
Networking, 3D printer, black and white laser printer and a color laser printer, several servers.
I had home assistant, Plex, Minecraft server, 7 days to die server, and many other services.
Servers are Ryzen 5950x and the other is a threadripper 24 core.
The other side of the rack was HDMI switchers and some game consoles.
Going to miss the 1gbps fiber internet, we now have Starlink.
-
Can't but join in the fun. Meet the Egg Mini. Does all sorts of humble servitude, but the coolest thing is a webserver only accessible via Wireguard through HAproxy running on a Digital Ocean droplet.
-
My main server cabinet at my parents house. I have one old Synology for backups, one home built Xpenology for streaming and one small server with old gaming hardware for steam link, but its barely running anymore. Theres one HP server with 2x Xeon E5 and 128GB missing in the photo that I got for 100€ at an auction, which I use for occasional game server hosting.
At home I have this setup, my main synology NAS and a thinkcentre with an i7 and 16GB of ram for Minecraft and FiveM.
-
Some of yall just need to stop with your "cable maintenence" and "airflow" or you're gonna give the rest of us a complex. 😁
A number of these setups are tight. I'll post my janky ass "comm closet" when I get home later.
Edit: (1) Fanless MiniPC running pfsense (2.5gbe); (2) 8 port dumb switch; (3) modem; (4) 8 bay NAS running OMV; (5) random USB HDD.
-
Some context shots. This is in my garage which is directly below my living room. Everything leads back here and the cat cable from the fibre ONT leads here from the other side of the garage also. I have 2 redundant gig links to a switch in the living room where it was weirdly easier to go outside the garage, up the outside wall and then back in to the house.
There is a rack mount standard desktop with a 4 port Intel NIC and an IT mode HBA, 6 spinning HDDs, an SSD and 2x NVME drives. This is my main Proxmox server running Opnsense and a whole host of other services, including email. On to of it I have a monitor, 3 external HDDs used for backups and another desktop I picked up cheap which runs as the Zoneminder CCTV box.
At the very top there is a cheap POE dumb switch that powers the CCTV camera and then a Netgear 24 port switch with VLANs configured for various networks - Main, IoT, VoIP, CCTV... I have the same switch up in the living room also.
At the very bottom almost invisible is a Belkin UPS and a strip adapter that has several smart plugs in which I use to power my backup drives. That way my backup drives are off, not just unmounted unless a backup is running. The aim was to avoid any attacker / system wide issue taking down the backup drives. I sleep a smidgen better at night for that.
Not pictured is an Odroid HC2 that lives upstairs and that I had hoped to rig up as a remote backup device, but I've never really got around to setting it up properly or putting anything other than a small capacity HDD in. It does run HomeAssistant though so that's pretty useful.
A bit more context
More guts showing the mess.
Lets just appreciate how damn lucky I was when I picked up this server rack. It doesn't fit with the carpet down, so had to peel that back. Millimetre perfect.
-
Install Linux on both ps4 and switch and selfhost something on them
-
I'd rather not. It's literally a Dell workstation machine from the mid-2000s. It's like Wolfgang's Channel kryptonite
-
Tower of Pisa would like a word with you.
Or is it just the camera angle that makes it look so tilted?
-
-
What I took from this post is that every living room / home theater setup needs a server rack instead of a HiFi rack. Dudnt matter what you thrown in it, it looks badass.
-
Top to bottom:
- Unifi US-16-XG
- OPNsense DEC740
- Unifi Switch 24
- Unifi Switch 16 PoE
- DIY server with an AsrockRack X470D4U mainboard
- DIY DAS in an old server case with 18 3.5" bays
Not in picture: My UPSes, RIPE Atlas probe and an Odroid N2+ running my Home Assistant instance
The server runs Proxmox with a bunch of LXC containers running a Docker Swarm cluster.
There's too many services running so I'm not listing them all. Let's just say my phone is not going to be thrilled if it goes down. Also, this post was posted through said server.
-
A bit concerning that it is propped up on a night table and sitting right next to a doorway. There's only two of us in the house but I would never place electronic equipment like that near a doorway where I myself could just knock it over (because I've done stuff like that in the past). Get it on the floor or on the opposite side of the room where no one including yourself can walk or move around near it.
-
What do all you guys use these setups for?
-
My primary use case is safeguarding my important personal artifacts (family photos, digitized paperwork, encryption key / account recovery / 2FA backups) against drive failure (~2TB), followed by my decently sized Plex server (23TB), immich, nextcloud, and various other small things like selfhosted bitwarden, grocy, ollama, and stuff like that.
I run all of my stuff off of a 6 bay Synology (more drives helps with capacity efficiency as double redundancy with 6 drives costs you 30% and I wanted to be protected against drive failures during rebuilding) with an Intel nuc on top to run plex/jellyfin transcoding using quicksync instead of loading the poor nas with cpu transcoding, I also run ollama on the nuc since it has faster cores than the nas.
-
Life
-
-
Nice trapezoid
-
The main server. Specs:- Ryzen Threadripper 7960X
- 256GiB (4x64GiB quad-channel) of DDR5 REG/ECC running at 4800MT/s
- 256GB SATA for Proxmox boot disk, 2TB WD BLACK SN850X NVMe for VM data
- NVIDIA RTX 4080 Super for workstation use, AMD Radeon Pro WX 3100 for Proxmox console
- Proxmox VE
- RHEL 9 for server (14c, 160GiB RAM, 800GB SSD), Arch for workstation (10c, 80GiB RAM, 1.6TB SSD)
Server runs:
- Mastodon
- Minio for S3 bucket
- Lemmy
- Four Minecraft server, two modded and two vanilla
- Jellyfin
- Roon
- Komga
- Nextcloud AIO
- Pi-Hole
- Bluesky PDS
Bonus: I use Oracle Cloud server for:
- Mirror
- Ghost blog
- Synapse
- Vaultwarden
- Wikiless
-
shes listing to the starboard side
-
A mini pc, a raspberry pi 4, 3*usb HDD (2*8tb mirrored and a 1tb for local back up), some Netgear router, a whole lot of spaghetti.
-
Main Server
Services
- Jellyfin
- FreshRSS
- Borg
- Immich
- Nextcloud AIO
- RSS-Bridge
Hardware
- CPU: Intel Core i5-4460
- GPU: Nvidia GeForce GTX 760
- Memory: Kingston KHX1600C10D3/8G (8GB DDR3-1600)
- Motherboard: ASUS H81I-PLUS
OS
- Ubuntu 22.04.5 LTS
Reverse Proxy
Services
- Caddy
Hardware
- Rasbperry Pi 4 Model B Rev 1.5 (2GB)
OS
- Debian 12
Router
Hardware
- TP-Link Archer C7 AC1750
OS
- OpenWRT 23.05.5
-
Why did you go with a CPU with DDR 3 ram?
-
It wasn't a deliberate choice. It was simply hardware that I already had available at the time. I have had no performance issues of note as a result of the hardware's age, so I've seen no reason to upgrade it just yet.
-
-
Looks like a Fractal Node 304? I have one too ! I took it on a boat for 3 months a few years ago, it was fun.
Hardware
- Node 304
- Asrock B550M motherboard, Ryzen 3 3100, 32 GB DDR4, 1TB NVME SSD.
- Nvidia GT730 (used to connect to a TV on the boat)
- 4x12TB HDD in Raidz1
Router
Unifi Dream Machine
Backups
14TB USB external HDD
OS, Core and Network services
OS
- Ubuntu - Proxmox Virtual Env
- aptcacher-ng (apt cache)
Network
- pfsense firewall (+ Unifi router) with pfblocker-ng
- caddy as reverse proxy
- pihole with unbound
Supervision
- zabbix for diagnostics and monitoring
- Gotify for notifications
Services
Programming and Stuff
- Gitlab
- Code-server
Media, files
- Nextcloud
- Jellyfin
- Kavita
- Calibre-server
- Kiwix
- formerly airsonic-ng for podcasts.
Social
- Firefish - mastodon (Misskey fork), now sadly deprecated
- bookwyrm (federated goodreads compatible with mastodon)
Other
- 13ft (paywall unlocker and simple web-proxy)
- linguacafe (language learning)
Soon
- more admin automation (ansiblr agent)
- hardware transcode (GPU upgrade and passthrough, or remote ffmpeg).
-
Looks like a Fractal Node 304?
Yep! I've found that the case is possibly a little too cramped for my liking — I'm not overly fond of the placement of the drive bay hangars — but overall it's been alright. It's definitely a nice form factor.
-
Soon to be neater, with the official memory fan, more drive caddys, and an extra DHCP/DNS server.
-
I know it's a mess 😅 That NUC holds my Proxmox server.
That box is my 20TB Unraid server exclusively for storage.
-
My Selfhosting setup:
- Apple TV 4K for HomeKit
- Intel NUC 6i3SYH with Proxmox (HomeAssistant and the rest of selfhosted services)
- SkyConnect
- Philips Hue Bridge
- Broadlink RM mini3
- Synology DS218Play
And a Logitech K400 Plus that I use when I have to use directly the NUC
-
How do you like immich? Any thing you don't like? Favorite features etc? I have a setup I built, but, immich looks very nice
-
-
Looks like shit, but it works Running all the services you would expect.
-
Is that just, like, an external hard drive?
